17” / 19” LCD Console with Modularized combo KVM switch User Manual Version 1.0
9 5. Hardware INSTALLATION Precaution: 1. Please check the whole unit was not damaged and lost during shipping process. If you encounter
10 Step 2: Slide the LCD drawer onto the rails Figure 2: Slide LCD drawer onto the rails Step 3: Secure LCD drawer by screwing
11 Keyboard / Touch pad module replacement: Step 1. Releases screws of both rails side. Step 2. Release screws of fr
12 KVM SWITCH module replacement: Release screws of both sides.
13 Keyboard/Touch pad Lock Release ( Push-In Drawer ): Note: When you want to push in Keyboard/Touch pad module, plea
14 5.2 KVM SWITCH INSTALLATION Precaution: Please turn off computers and devices when you start to install KVM Switch. For compute
15 5.2.2 System connection: Please use Custom combo cable to connect your computers. Please refer to the figures and instruction show
16 B. Connect only PS/2 (keyboard/mouse) and VGA connectors to computers. PS/2 (Keyboard & Mouse) and VGA connected C. Connect o
17 To Install cascade chain, please follow the instruction below: A. Please turn off computers and devices when you start to install KVM Sw
18 Cascade chaining 5.2.4 Firmware download connector ! The min-USB female connector on the rear of KVM switch is for firmware upgrade
1 Index 1. INTRODUCTION……………………………………………………………………………………………2 1.1 OVERVIEW …………………….…..………………………………….………………………… ………2 1.2 FEATURES………… ……………………
19 6. Operation You can control computers via 8-Port or 16-Port Combo KVM Switch by front push button, hotkeys and OSD. 1. Push butto
20 Setup leading hot key to < Caps Lock > < CTRL > →→→→ < CTRL > →→→→ < Caps Lock > →→→→ &
21 Switch to left one channel <Scroll Lock> →→→→ <Scroll Lock> →→→→ <Left Arrow> Switch to right one
22 Channel select to third layer < Scroll Lock > →→→→ < Scroll Lock > →→→→ <D> →→→→ <CH-L1 >
23 6.1.6 Auto-Scan Function When you enable Auto-Scan function by pressing <Scroll Lock> twice, then <S> and <Enter>. The
24 Scan all working computers. Scan all computers which are marked for auto-scan. 6.1.9 Auto-scan time interval The auto-scan time int
25 7 OSD Operation 7.1 OSD Main Menu Press < Scroll Lock> twice and <Enter>, then you will enter to OSD (On Screen Display) ma
26 Channel LOCK indicator ( Status STA ) L: Indicating this channel is locked. BLANK: Indicating this channel is normal without locked.
27 F3: Lock: setup lock/unlock, only available when F5 Security is enabled. F4: Rename: rename selected channel name.
28 7.3 Setup in OSD: <F1> Please use <Up> or <Down> arrow key to select the item you want to change, and use <Left>
2 1. Introduction Thank you for purchasing the LCD Console (with modularized combo KVM Switch). We recommend that you read this manual thor
29 Menu Position Setup Banner: Use four arrow keys to move the channel banner to the desired position. Press <ESC> to save the c
30 7.4 Auto-Scan in OSD: <F2> 7.4.1 Start to auto-scan in OSD Press <F2> in OSD main menu. The auto-scan banner will be shown
31 7.5 Console Lock in OSD: <F3> If the security mode is enabled in OSD mode (by pressing <F5> in OSD mode, please refer section
32 7.6 Channel rename: <F4> Select the channel to rename by using up/down arrow key and press <F4> in OSD main menu. The cha
33 Security setup main window 7.7.2 Security Mode To change the security mode setting, please move the highlight bar to Security Mode, a
34 7.7.4 Authorized user setup 3 authorized users are admitted to manage the KVM switch. To change the user name and password, please move t
35 7.8 Lock Port: <F6> 7.8.1 Lock Port Only administrator can lock port. Please move the highlight bar to the channel to lock, and p
36 8 Sun Microsystems Function Key Emulation: There are 16 special functions on the Sun Microsystems keyboard, Combo Free KVM Switch can em
37 Disclaimer Information in this document is subject to change without notice. The manufacturer does not make any representations or warran
3 1.2 Features The LCD console (with modularized combo KVM switch ) is a LCD console featuring an integrated 17-inch or 19-inch LCD panel
4 Plug and Play ( Windows 98/SE users might need your Windows CD to install the HID driver for USB keyboard/mouse.) KVM firmware is upg
5 KVM Switch module Model No. KL-2708 / KL-2716 KL-2908 / KL-2916 Standard Meets EIA RS-310C 1U 19” Rack-Mount standard Num
6 3. Requirements KVM Switch Extra Console ( Remote Control ): The following hardware components are required for the extra external consol
7 4. Components 4.1 Front View 3 1 5 2
8 4.2 Rear View ( LCD console ) 4.3 Rear View ( KVM Switch module ) 8-port KVM switch module ( connecting port
Comments to this Manuals