Longshine LCS-FS6108-B User Manual download pdf (Page 3)

Introduction

The device is a powerful, high-performance Fast

Ethernet switch, with all ports capable of 10 or

100Mbps auto-negotiation operation (NWay),

which means the switch could automatically

negotiate with the connected partners on the

network speed and duplex mode. It is ideal for

micro-segmenting large networks into smaller,

connected subnets for improved performance,

enabling the bandwidth demanding multimedia

and imaging applications. Compared to the

shared 10Mbps or 100Mbps networks, the switch

delivers a dedicated 10/100Mbps connection to

every attached client with no bandwidth

congestion issue. This switch also supports auto

MDI / MDI-X function. Each port could be used to

connect to another switch or hub with no

crossover RJ-45 cable.

Store-and-forward switching mode promises the

low latency plus eliminates all the network errors,

including runt and CRC error packets. To work

under full-duplex mode, transmission and

reception of the frames can occur simultaneously

without causing collisions as well as double the

network bandwidth.

The switch is plug-n-play without any software to

configure and also fully compliant with all kinds of

network protocols. Moreover, the rich diagnostic

LEDs on the front-panel can provide the operating

status of individual port and whole system.

Before you start to install the switch, check the

following contents in this package：

 One NWay switch

 One external power adapter

 User’s manual

1 2 3 4 5 6 7 8 ... 39 40

No comments

Longshine LCS-FS6108-B User Manual Page 3